HUAWEI LTE CPE B593 4G Router Installation and Firmware Upgrade

HUAWEI B593 4G LTE Router Installation--Quick guide to get online with 4G router   1)    You should start by inserting the SIM card and then plug the power adapter to the B593 4G router. SIM card must be inserted on the right side when looking at the front of the router. You can see how the SIM card slot in the LTE CPE B593. Power plug must be inserted behind the router.

 

2) Now you need to connect the router to your computer via wireless network (WiFi). You will find the router's name and network code on the sticker behind the router. WLAN - Name (SSID) is the router's name and WLAN - Key (WPA/WPA2) is the router's wireless network password. When you first connect the router via WiFi, it would be necessary to enter the WLAN key and get connected. If you experience problems connecting to the router with the information on the back of the router, this information may be changed. Press reset on the side of the router with a ball pen for about 20 seconds and try again.  

   

3) Once connected, open your Internet browser (eg Internet Explorer, chrome or Safari) and in the address bar, type the router's address http://192.168.1.1 . It’s the device website on the label.  

 

 

 

 

The default language is English, but you can choose your preferred language. Username is admin and password admin in lowercase. You can also find both the router's address and password on the sticker behind the router.  

4) The router will ask you to change the password when you login. You can ignore it. Your router is already secured with the unique network code that you entered earlier in order to connect to the router.  

5) Now select Setup Wizard in the left menu.   You must validate your PIN to the SIM card. You will find PIN 1 on the frame, you took the SIM card out of the scrape area. Then click Validate. Tick the Enable next to Save my PIN and press Next. Please note that the router stores the PIN code for the SIM card. Put a new SIM card in the router at a time; enter the PIN code for the new SIM card in the same way.  

 

But if you use unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is selling the unlocked B593 Router.  

 

6) You do not need to change anything in the next section called Internet. Network mode is by default to Auto and Connection Mode to Always On. Please note that “LTE Only" means "4G Only" and "WCDMA only" means "3G only" in Network mode. You can try to isolate the signal to one of them if you wish. If you set it in Auto as recommended, the router will always try to use 4G as a primary connection. Press Next.  

   

7) You do not need to change anything in the next section called WLAN . If you want to call your router something other than WLAN1-xxxx , it's SSID , you need to change. We do not recommend that you do, and then you will always be able to find the router's name on the back of the router if you do not change it. Press Next.  

 

8) We do not recommend that you change the following in the next point WLAN Security. Network code field is WPA with pre-shared key. This code is already unique and you should only use it once when you connect to the router for the first time on your computer or your mobile. You will also be able to find the network code on the back of the router if you ever need it again later. If you want to change it anyway, you must enter a code on minimum 8 characters and press Next. Otherwise, press the Next without changing the information below.

       

9) Now press Submit and your router will reboot and you will be on the internet.  

 

10) Repeat point 2 for all devices to connect with the Internet.    

Color Codes  

Color Coding Mode on the front of the router

The purple color means that the router lacks the PIN. 

The blue color means that you are on 4G. 

The green color means that you are on 3G.

 

Firmware upgrade   --- Quick Guide for upgrade

1)  Download the latest HUAWEI B593u-12 firmware upgrade>  (. zip 26 Mb)      

2) Save the file to your desktop and unzip the file when you are finished.      

3) Open your browser and log into your router via 192.168.1.1

Username: admin

Password: admin (lower case)    

4) Select S ystem > Upgrade > select tar.  

(The file you just extracted from the zip. file)> press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12.          

 

These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models, but the firmware varies.

Unlocked Telekom Speedport II LTE Router

Since November 2012, the Germany Telekom finally has a successor to the first generation LTE router "Speedport ". Simply, the name of the new 4G router is "Speedport LTE II". What are the advantages and what are the differences to "Speedbox"? Answers to these questions can be found in the following article, including a detailed summary of all key data for Speedport II LTE Router.          

Features and characteristics of the LTE Speedport II (Telekom)
Manufacturer Model	Huawei B593u-12
Download Speed	up to 100 Mbit/s
Upload Speed	Up to 50 Mbit/s
Supported LTE bands:	LTE Band 3/7/20 (800/1800/2600MHz)
Backward compatible with:	HSPA/HSPA+/UMTS (900/2100 MHz)
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system		no
Port for ISDN phones		no
DECT		no
Networking | LAN & WLAN
LAN ports		4 LAN ports (RJ45) 100 Mbps
WLAN standards		Wi-Fi 802.11b/g for up to 32 users
5GHz Wi-Fi support		no
Coding		WEP, WPA, WPA2
USB		Yes, USB 2.0
Other
Dimensions | Weight		177 mm x 193 mm x 34 mm | approx 500 grams
Color		WHITE
Information material
Technical Data Sheet		» Datasheet PDF
available since ...		May 2012

 

 

The Speedport II with the new "Call & Surf via Funk" tariffs was launched in early December 2012 by Telekom. The router in LTE category 3 mode provides up to 100 Mbps download speed and capacity of 50 Mbps in upload. In addition, the Speedport II LTE is backward with 3G network, ie UMTS and HSPA (including DC-HSPA+). Earlier, the Telekom supplied from two different hardware versions, depending on what had just technically available at the customer network. A further improvement to the old port speed is the WLAN module. The new Speedport II now supports the latest "N" standard. Thus, home networks can reach via radio with up to 300 Mbit/s speed. There are also improvements in range and Wi-Fi reception. This is according to the manual, in confined spaces, up to 30 meters or outside up to 300 meters. There are 4 RJ45 ports with up to 100 Mbps. Under the white label, it indicates the manufacturer model is Huawei router with the ID "B593u-12".      

Fit for LTE Network in Europe     The previous Speedport LTE dominated only in the band of 800 MHz; the second version is now much more flexible. Besides the already mentioned backward compatibility, LTE band 7/20 (1800 and 2600MHz) is supported. Therefore, the Telekom in some regions also provide up to 100 Mbps data rate by Call & Surf via Funk (L) for the first time.  

   

Unlike the SPEEDBOX    

 

Both variants for Telekom 4G Router are confusingly similar, not only on the name. Technically, there is also almost identical design. But: When Speedport II is GSM (2G) not connected, so that the Call & Surf tariffs only run via 3G or 4G.  The Speedport LTE II is in white, while the Speedbox is packed in a black case.      

Prices and Rates  

 

The router can be purchased in the 4G shop (www.4gltemall.com) for around 399USD. And it’s SIM unlocked, if you want to change to Vodafone 4G network, you will not need to change another router.

Telekom Speedbox LTE Router – HUAWEI B593u-12

At Germany Telekom, there will soon be a successor to the "LTE Speedport ". As a new and upgraded 4G LTE router, the Huawei B593 is now presented by Telekom to public. Compared to its predecessor B390S-2, there are many improvements that are summarized below for you. In addition, you can have a general overview about the specification and features of the HUAWEI B593 LTE CPE.  

 

 

 

Features and characteristics of the LTE SpeedBox (Telecom)
Manufacturer Model	Huawei B593u-12
Download Speed	up to 100 Mbit/s
Upload Speed	Up to 50 Mbit/s
Supported LTE bands:	LTE Band 3/7/20 (800/1800/2600MHz)
Backward compatible with:	HSPA/HSPA+/UMTS (900/2100 MHz), GSM/EDGE/GPRS
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system	no
Port for ISDN phones	no
DECT	no
Networking | LAN & WLAN
LAN ports	4 LAN ports (RJ45) 100 Mbps
WLAN standards	Wi-Fi 802.11b/g for up to 32 users
5GHz Wi-Fi support	no
Coding	WEP, WPA, WPA2
USB	Yes, USB 2.0
Other
Dimensions / weight	195 (W) x 169 (H) x 64 (D) mm, at 444 grams
Color	black
Information material
Technical Data Sheet	» Datasheet PDF
available since ...	May 2012

 

Huawei B593 = Telekom Speedbox LTE  

 

As usual, the routers for Telekom and Vodafone are in difference label. To identify the devices, the appearance of the router is usually slightly modified (eg, color or some ports) and the logo of the mobile provider is customized for respect providers. The Speedbox LTE is in black color like Speedport LTE, while Vodafone B2000 is in white. But actually, they are the same model from HUAWEI B593, more accurately, the model number is B593u-12 LTE CPE.  From the label on the back of the router, we can see the details.    

Improvements  

 

The previous model Speedport LTE still belongs to the first Generation of LTE routers which were available in late 2010. Unfortunately, accordingly to the feedback from users, the Speedport LTE is not successful 4G equipment. LTE terminals were still scarce; therefore it had to be functional. The new version Speedbox LTE finally brings long overdue with new features and improvements.  

 

 

First, the Speedbox is also backward compatible with 3G and 2G networks. This is important in case LTE is not available around. This features help Speedbox automatically revert to the next fastest standard. Previously, customers had to unfortunately live with a total failure, because the fall-back function was not anticipated at the Speedport. In addition, the router B593u-12 now dominates the LTE frequency bands at 1800 MHz and 2600 MHz. The predecessor was only designed for LTE800, ie designed for rural areas. The maximum data rate of HUAWEI B593u-12 is doubled to 100 Mbit/s downstream and 50 Mbit/s for upload. Beyond is a new USB port and connection for phones. Both analog telephone and VOIP should be possible.      

 

 

Since, as already mentioned, the old Speedport is only capable of a wireless standard that Telekom provides far from two different modes. When choosing between the "Speedport LTE" and "Speedport HSPA", the router Speedbox will choose depending on which standard is more available to the customer. This features is smart for the users who are not familiar with 4G Routers.    

Availability

 

The Speedbox is available in the Telekom retail stores and online store www.4gltemall.com without LTE contracts. Many users prefer unlocked Speedbox, or more honestly, they would choose the factory model HUAWEI B593u-12 because they are just logo or appearance difference, functions are all the same and original factory model is SIM free for any operators.  

Vodafone B1000 4G LTE Router

Vodafone B1000 is a new 4G LTE router for Vodafone. Behind the router, there is a stick indicating the model number of "B390s-2" and the manufacturer company Huawei. The noble, handsome white case houses an LTE modem router with WLAN. Following you will find all the important details including specifications, characteristics and overview about Vodafone B1000 4G Router.  

 

 

Features and characteristics of the Vodafone B1000
Manufacturer and type designation	Huawei B390s-2
Download speed	Up to 50 Mbit/s
Upload speed	up to 10 MBit/s
Supported LTE bands:	LTE800 (band 20)
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system	no
Port for ISDN phones	-
Connection for analog phones	-
DECT	-
integrator answering machine	-
Networking | LAN & WLAN
LAN ports	4 LAN ports (RJ45)
WLAN standards	Wi-Fi 802.11b/g for up to 32 users
5 GHz Wi-Fi support	no
Coding	WEP, WPA, WPA2
USB	no
the provider side	» Vodafone

 

 

Technically speaking, the Huawei B390s-2 is in the B1000 series. In the industry it is common to "brand" hardware from original manufacturers but with their own logo on the appearance. Also the appearance may vary slightly from the "original". The integrated 4G-LTE modem B1000 is only compatible with the LTE band around 800 MHz. More specifically, it can on the band of 832 MHz - 862 MHz send (upload) and in the band of 791 MHz - 821 MHz receive (download).The supported bandwidth is 10 MHz. So the router is only unique for rural use up to 50 Mbit/s and is not suited for urban use. The chipset is "HiSilicon" (Hi6910), which is HUAWEI own chipset.  

 

 

 

Telephone:

 

Unfortunately, the router does not have a PBX. In the LTE tariffs from Vodafone, there is no telephone available, which is of course no problem. However, the provider also offers complete packages with phone line and optionally with fixed flat rate. Customers who order the version with telephone, will note get the B1000. Alternatively, a pure LTE router together with a conventional DSL router is supplied, which is named Vodafone B2000. The Vodafone B2000 is upgraded from B1000, which is not only better in network coverage, but also the functions and performance.  

 

LAN & wireless network properties:

 

The B1000 provides 4 LAN ports and of course Wi-Fi functionality for setting up a home network. The wireless network provided can be operated with standard 802.11b and 802.11g. With up to 54 Mbps integrated into the network, it can therefore support a maximum of 32 devices wirelessly (eg, laptop, internet radio). The latest "N" standard is not supported yet, which is a shame. Neither dominates the B1000 the spark in WLAN operation at 5 GHz. The LTE B2000 Router provides significantly more. And WEP, WPA and WPA2 encryption is possible options.      

Extras:

 

The Vodafone B1000 is curiously almost twice as heavy as the technically virtually identical Telekom Speedport LTE. The weight is 900 grams, if user worry about the place to lay this device, here are the exact dimensions: 177 x 193 x 34 mm (width x height x depth).