HUAWEI LTE CPE B593 4G Router Installation and Firmware Upgrade

HUAWEI B593 4G LTE Router Installation--Quick guide to get online with 4G router   1)    You should start by inserting the SIM card and then plug the power adapter to the B593 4G router. SIM card must be inserted on the right side when looking at the front of the router. You can see how the SIM card slot in the LTE CPE B593. Power plug must be inserted behind the router.

 

2) Now you need to connect the router to your computer via wireless network (WiFi). You will find the router's name and network code on the sticker behind the router. WLAN - Name (SSID) is the router's name and WLAN - Key (WPA/WPA2) is the router's wireless network password. When you first connect the router via WiFi, it would be necessary to enter the WLAN key and get connected. If you experience problems connecting to the router with the information on the back of the router, this information may be changed. Press reset on the side of the router with a ball pen for about 20 seconds and try again.  

   

3) Once connected, open your Internet browser (eg Internet Explorer, chrome or Safari) and in the address bar, type the router's address http://192.168.1.1 . It’s the device website on the label.  

 

 

 

 

The default language is English, but you can choose your preferred language. Username is admin and password admin in lowercase. You can also find both the router's address and password on the sticker behind the router.  

4) The router will ask you to change the password when you login. You can ignore it. Your router is already secured with the unique network code that you entered earlier in order to connect to the router.  

5) Now select Setup Wizard in the left menu.   You must validate your PIN to the SIM card. You will find PIN 1 on the frame, you took the SIM card out of the scrape area. Then click Validate. Tick the Enable next to Save my PIN and press Next. Please note that the router stores the PIN code for the SIM card. Put a new SIM card in the router at a time; enter the PIN code for the new SIM card in the same way.  

 

But if you use unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is selling the unlocked B593 Router.  

 

6) You do not need to change anything in the next section called Internet. Network mode is by default to Auto and Connection Mode to Always On. Please note that “LTE Only" means "4G Only" and "WCDMA only" means "3G only" in Network mode. You can try to isolate the signal to one of them if you wish. If you set it in Auto as recommended, the router will always try to use 4G as a primary connection. Press Next.  

   

7) You do not need to change anything in the next section called WLAN . If you want to call your router something other than WLAN1-xxxx , it's SSID , you need to change. We do not recommend that you do, and then you will always be able to find the router's name on the back of the router if you do not change it. Press Next.  

 

8) We do not recommend that you change the following in the next point WLAN Security. Network code field is WPA with pre-shared key. This code is already unique and you should only use it once when you connect to the router for the first time on your computer or your mobile. You will also be able to find the network code on the back of the router if you ever need it again later. If you want to change it anyway, you must enter a code on minimum 8 characters and press Next. Otherwise, press the Next without changing the information below.

       

9) Now press Submit and your router will reboot and you will be on the internet.  

 

10) Repeat point 2 for all devices to connect with the Internet.    

Color Codes  

Color Coding Mode on the front of the router

The purple color means that the router lacks the PIN. 

The blue color means that you are on 4G. 

The green color means that you are on 3G.

 

Firmware upgrade   --- Quick Guide for upgrade

1)  Download the latest HUAWEI B593u-12 firmware upgrade>  (. zip 26 Mb)      

2) Save the file to your desktop and unzip the file when you are finished.      

3) Open your browser and log into your router via 192.168.1.1

Username: admin

Password: admin (lower case)    

4) Select S ystem > Upgrade > select tar.  

(The file you just extracted from the zip. file)> press Upgrade, then wait for few minutes, the system will auto upgrade the firmware of the HUAWEI B593u-12.          

 

These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models, but the firmware varies.

Unlocked Telekom Speedport II LTE Router

Since November 2012, the Germany Telekom finally has a successor to the first generation LTE router "Speedport ". Simply, the name of the new 4G router is "Speedport LTE II". What are the advantages and what are the differences to "Speedbox"? Answers to these questions can be found in the following article, including a detailed summary of all key data for Speedport II LTE Router.          

Features and characteristics of the LTE Speedport II (Telekom)
Manufacturer Model	Huawei B593u-12
Download Speed	up to 100 Mbit/s
Upload Speed	Up to 50 Mbit/s
Supported LTE bands:	LTE Band 3/7/20 (800/1800/2600MHz)
Backward compatible with:	HSPA/HSPA+/UMTS (900/2100 MHz)
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system		no
Port for ISDN phones		no
DECT		no
Networking | LAN & WLAN
LAN ports		4 LAN ports (RJ45) 100 Mbps
WLAN standards		Wi-Fi 802.11b/g for up to 32 users
5GHz Wi-Fi support		no
Coding		WEP, WPA, WPA2
USB		Yes, USB 2.0
Other
Dimensions | Weight		177 mm x 193 mm x 34 mm | approx 500 grams
Color		WHITE
Information material
Technical Data Sheet		» Datasheet PDF
available since ...		May 2012

 

 

The Speedport II with the new "Call & Surf via Funk" tariffs was launched in early December 2012 by Telekom. The router in LTE category 3 mode provides up to 100 Mbps download speed and capacity of 50 Mbps in upload. In addition, the Speedport II LTE is backward with 3G network, ie UMTS and HSPA (including DC-HSPA+). Earlier, the Telekom supplied from two different hardware versions, depending on what had just technically available at the customer network. A further improvement to the old port speed is the WLAN module. The new Speedport II now supports the latest "N" standard. Thus, home networks can reach via radio with up to 300 Mbit/s speed. There are also improvements in range and Wi-Fi reception. This is according to the manual, in confined spaces, up to 30 meters or outside up to 300 meters. There are 4 RJ45 ports with up to 100 Mbps. Under the white label, it indicates the manufacturer model is Huawei router with the ID "B593u-12".      

Fit for LTE Network in Europe     The previous Speedport LTE dominated only in the band of 800 MHz; the second version is now much more flexible. Besides the already mentioned backward compatibility, LTE band 7/20 (1800 and 2600MHz) is supported. Therefore, the Telekom in some regions also provide up to 100 Mbps data rate by Call & Surf via Funk (L) for the first time.  

   

Unlike the SPEEDBOX    

 

Both variants for Telekom 4G Router are confusingly similar, not only on the name. Technically, there is also almost identical design. But: When Speedport II is GSM (2G) not connected, so that the Call & Surf tariffs only run via 3G or 4G.  The Speedport LTE II is in white, while the Speedbox is packed in a black case.      

Prices and Rates  

 

The router can be purchased in the 4G shop (www.4gltemall.com) for around 399USD. And it’s SIM unlocked, if you want to change to Vodafone 4G network, you will not need to change another router.

Telekom Speedbox LTE Router – HUAWEI B593u-12

At Germany Telekom, there will soon be a successor to the "LTE Speedport ". As a new and upgraded 4G LTE router, the Huawei B593 is now presented by Telekom to public. Compared to its predecessor B390S-2, there are many improvements that are summarized below for you. In addition, you can have a general overview about the specification and features of the HUAWEI B593 LTE CPE.  

 

 

 

Features and characteristics of the LTE SpeedBox (Telecom)
Manufacturer Model	Huawei B593u-12
Download Speed	up to 100 Mbit/s
Upload Speed	Up to 50 Mbit/s
Supported LTE bands:	LTE Band 3/7/20 (800/1800/2600MHz)
Backward compatible with:	HSPA/HSPA+/UMTS (900/2100 MHz), GSM/EDGE/GPRS
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system	no
Port for ISDN phones	no
DECT	no
Networking | LAN & WLAN
LAN ports	4 LAN ports (RJ45) 100 Mbps
WLAN standards	Wi-Fi 802.11b/g for up to 32 users
5GHz Wi-Fi support	no
Coding	WEP, WPA, WPA2
USB	Yes, USB 2.0
Other
Dimensions / weight	195 (W) x 169 (H) x 64 (D) mm, at 444 grams
Color	black
Information material
Technical Data Sheet	» Datasheet PDF
available since ...	May 2012

 

Huawei B593 = Telekom Speedbox LTE  

 

As usual, the routers for Telekom and Vodafone are in difference label. To identify the devices, the appearance of the router is usually slightly modified (eg, color or some ports) and the logo of the mobile provider is customized for respect providers. The Speedbox LTE is in black color like Speedport LTE, while Vodafone B2000 is in white. But actually, they are the same model from HUAWEI B593, more accurately, the model number is B593u-12 LTE CPE.  From the label on the back of the router, we can see the details.    

Improvements  

 

The previous model Speedport LTE still belongs to the first Generation of LTE routers which were available in late 2010. Unfortunately, accordingly to the feedback from users, the Speedport LTE is not successful 4G equipment. LTE terminals were still scarce; therefore it had to be functional. The new version Speedbox LTE finally brings long overdue with new features and improvements.  

 

 

First, the Speedbox is also backward compatible with 3G and 2G networks. This is important in case LTE is not available around. This features help Speedbox automatically revert to the next fastest standard. Previously, customers had to unfortunately live with a total failure, because the fall-back function was not anticipated at the Speedport. In addition, the router B593u-12 now dominates the LTE frequency bands at 1800 MHz and 2600 MHz. The predecessor was only designed for LTE800, ie designed for rural areas. The maximum data rate of HUAWEI B593u-12 is doubled to 100 Mbit/s downstream and 50 Mbit/s for upload. Beyond is a new USB port and connection for phones. Both analog telephone and VOIP should be possible.      

 

 

Since, as already mentioned, the old Speedport is only capable of a wireless standard that Telekom provides far from two different modes. When choosing between the "Speedport LTE" and "Speedport HSPA", the router Speedbox will choose depending on which standard is more available to the customer. This features is smart for the users who are not familiar with 4G Routers.    

Availability

 

The Speedbox is available in the Telekom retail stores and online store www.4gltemall.com without LTE contracts. Many users prefer unlocked Speedbox, or more honestly, they would choose the factory model HUAWEI B593u-12 because they are just logo or appearance difference, functions are all the same and original factory model is SIM free for any operators.  

Vodafone B1000 4G LTE Router

Vodafone B1000 is a new 4G LTE router for Vodafone. Behind the router, there is a stick indicating the model number of "B390s-2" and the manufacturer company Huawei. The noble, handsome white case houses an LTE modem router with WLAN. Following you will find all the important details including specifications, characteristics and overview about Vodafone B1000 4G Router.  

 

 

Features and characteristics of the Vodafone B1000
Manufacturer and type designation	Huawei B390s-2
Download speed	Up to 50 Mbit/s
Upload speed	up to 10 MBit/s
Supported LTE bands:	LTE800 (band 20)
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephone
With integrated telephone system	no
Port for ISDN phones	-
Connection for analog phones	-
DECT	-
integrator answering machine	-
Networking | LAN & WLAN
LAN ports	4 LAN ports (RJ45)
WLAN standards	Wi-Fi 802.11b/g for up to 32 users
5 GHz Wi-Fi support	no
Coding	WEP, WPA, WPA2
USB	no
the provider side	» Vodafone

 

 

Technically speaking, the Huawei B390s-2 is in the B1000 series. In the industry it is common to "brand" hardware from original manufacturers but with their own logo on the appearance. Also the appearance may vary slightly from the "original". The integrated 4G-LTE modem B1000 is only compatible with the LTE band around 800 MHz. More specifically, it can on the band of 832 MHz - 862 MHz send (upload) and in the band of 791 MHz - 821 MHz receive (download).The supported bandwidth is 10 MHz. So the router is only unique for rural use up to 50 Mbit/s and is not suited for urban use. The chipset is "HiSilicon" (Hi6910), which is HUAWEI own chipset.  

 

 

 

Telephone:

 

Unfortunately, the router does not have a PBX. In the LTE tariffs from Vodafone, there is no telephone available, which is of course no problem. However, the provider also offers complete packages with phone line and optionally with fixed flat rate. Customers who order the version with telephone, will note get the B1000. Alternatively, a pure LTE router together with a conventional DSL router is supplied, which is named Vodafone B2000. The Vodafone B2000 is upgraded from B1000, which is not only better in network coverage, but also the functions and performance.  

 

LAN & wireless network properties:

 

The B1000 provides 4 LAN ports and of course Wi-Fi functionality for setting up a home network. The wireless network provided can be operated with standard 802.11b and 802.11g. With up to 54 Mbps integrated into the network, it can therefore support a maximum of 32 devices wirelessly (eg, laptop, internet radio). The latest "N" standard is not supported yet, which is a shame. Neither dominates the B1000 the spark in WLAN operation at 5 GHz. The LTE B2000 Router provides significantly more. And WEP, WPA and WPA2 encryption is possible options.      

Extras:

 

The Vodafone B1000 is curiously almost twice as heavy as the technically virtually identical Telekom Speedport LTE. The weight is 900 grams, if user worry about the place to lay this device, here are the exact dimensions: 177 x 193 x 34 mm (width x height x depth).  

Vodafone B2000 4G LTE Router

 

Vodafone B2000 is the direct successor to the B1000 LTE Router from Vodafone. This new 4G wireless gateway for housing is from the Chinese manufacturer Huawei. Someone may the B2000 looks similar to LTE CPE B593, but more specifically, it is just the Huawei B593 in Vodafone logo. Below we could see the key features and specifications of Vodafone B2000 4G LTE Router.        

Features and characteristics of B2000 Vodafone LTE Router
Manufacturer and type designation	B2000 (Huawei B593u-12)
Download Speed	up to 100 Mbit/s
Upload Speed	Up to 50 Mbit/s
Supported LTE bands:	LTE Band 7/20 (800/2600MHz)
backward compatible with:	HSPA, HSPA+, UMTS (900, 2100 MHz), GSM
MIMO Support:	MIMO 2x2
Connector for external antenna	Yes, 2 SMA female
Category:	LTE Category 3 (3GPP Release 8) Router
Telephony
With integrated telephone system	yes
Port for ISDN phones	?
Connection for analog phones	yes, 2xRJ11
DECT	?
integrator answering machine	-
Networking | LAN & WLAN
LAN ports	4 LAN ports (RJ45)
WLAN standards	Wi-Fi 802.11b / g for up to 32 users
5 GHz Wi-Fi support	no
Coding	WEP, WPA, WPA2
USB	Yes, USB 2.0
Information material
Manual	Vodafone B2000 User Manual (PDF)
Available since ...	since April 2012 on Vodafone
Read Review	B2000 Review
the provider side	Vodafone

   

B2000 = Huawei B593  

 

 

Following the Vodafone B1000, B2000 is with improved hardware based on support from the Chinese manufacturer Huawei. The appearance of B2000 looks like the " Speedbox LTE "by Telekom, they are both from the original model Huawei B593u-12. With the demand from the operator, they adapted to the design for the respective mobile provider and logo. Thus, the B2000 from Vodafone comes in a white gown, while Telekom is focusing on noble black.  

 

   

More power with LTE  

 

 

First, the positive features with improved LTE attract eyes. While the B1000 "only" supported up to 50 Mbit/s, the B2000 now offers full support of up to 100 Mbps download speed and 50 Mbps upload transmission. The data is based on perfect network reception conditions. Huawei has also broadened the network support on Vodafone B2000. Instead of only on the LTE800 band, the B2000 can now also be used for LTE 2.6GHz (1.8 GHz would possibly be available after later firmware update). With backward compatible with 3G or 2G networks, when LTE is not available, it switches to HSPA, UMST, GSM or necessary. But for the B1000, this feature was not yet operational. Two external antennas can be connected via SMA connector to B2000 in case that the local reception conditions are not sufficient. A new feature is the telephone support, which is not supported by B1000.    

Telephone and WLAN  

Vodafone B2000 is the first time to bring telephones connection. If using B1000 Router, you had to combine with a DSL router to set up an LTE phone system or analog. B2000 LTE Router also supports VOIP, there are 2 RJ11 telephone interface. Local wireless networks can now be operated with the contemporary 802.11n WLAN standard with the B2000. That means up to 300 Mbps transfer rate could make true. Unfortunately, B2000 Router is lack of support the 5GHz band, but WEP encryption, WPA and WPA2 and 4 LAN Ports are available.   Now you can get the Vodafone B2000 4G LTE Router from www.4gltemall.com .

How to Configure and Setup HUAWEI B890 LTE Wireless Gateway

HUAWEI 4G LTE Gateways are new for most of the users, but most of them are user-friendly and users don’t need many steps to configure. In most cases, the devices would automatically setup and connects to networks. Some users may want to set some parameters per their preference. Below is the user guide for your reference.   How to configure your terminal Intelligent 4G LTE Gateway Huawei B890    A. Insert your SIM card To take advantage of 4G LTE speeds on your providers’ network, you must use a 4G SIM card.

1. Plug the power cable
2. Insert the SIM card to the SIM card slot.
3. Click the power button
4. The device will turn itself.

  B. After Connect to your computer to HUAWEI B890 4G LTE Smart Hub, you can login to HUAWEI B890 through wireless connection The Intelligent Terminal Huawei B890 LTE Gateway can connect up to 32 wireless devices.

1. Locate the sticky under your HUAWEI B890.
2. Locate the SSID and WIFI Key line on the sticker.
3. Use the information found on the sticker to connect your wireless devices.

  C. Connect to Smart Hub for the first time and change the password Once the Intelligent Terminal 4G LTE Huawei B890 is connected to your computer, log in and change the default password. The Smart Hub require change password the first time you connect.

1. From your computer, open your Web browser.
2. Type http://huawei.smarthub in the address bar.
3. Box Username default should be “admin”.
4. Type the password for the Admin account.  (NOTE: The default password is admin.)
5. Press Enter or click Ok.
6. Window Change the password of the connection opening appears.
7. Enter the current password.
8. Enter a new password.
9. Confirm the password.
10. Click Apply.

  D. Configure your HUAWEI B890 LTE Wireless Gateway Use the setup wizard to help you configure the Intelligent Terminal HUAWEI B890 4G Router.

1. From your computer, open your Web browser .
2. Type http://huawei.smarthub in the address bar.
3. Box Username default should be admin.
4. Type the password for the Admin account.
5. Press Enter or click Ok.
6. Click on Settings
7. In the left column, click Quick Setup.
8. If necessary, adjust the time zone on the page Welcome to the Quick Start Wizard. (NOTE: It is recommended to keep other default settings)
9. Click Next
10. The screen Configure the profile appears. (Make sure you type the right APN for your SIM card provider. NOTE: Keep the other default settings.)
11. Click Next. .
12. The screen Configure the WLAN setting appears. You can change the box SSID name, and enter the name you want to identify your network. It is recommended to keep SSID Broadcast to Enable.
13. Click Next
14. The screen Configure the WLAN setting appears. Select the type of authentication. (NOTE: It is recommended to use WPA2-PSK). Select the encryption method. (NOTE: It is recommended to use TKIP + AES.) Enter your WPA pre-shared key.
15. Click Next
16. Check your settings and click Finish to confirm.

ZTE MF28B Rogers LTE Rocket Hub VS ZTE MF28G 4G LTE Router

As one of the main 4G LTE telecommunication equipment vendor, ZTE has presented many 4G LTE router to public, and most of them are already for operators' contract plan. Unlike Huawei B593 4G LTE CPE many modification models, each of ZTE 4G LTE routers has specific modem name, even though they look almost same in appearance.      

ZTE 4G LTE routers are designed in same appearance model, but they are not completely the same in some aspects.  Today, we will have a review of the difference between ZTE MF28B and MF28G 4G LTE Router.  

 

Network Bands  

Most of the routers with appearance differ on the network bands. They are for different operators. ZTE MF28B Router is for Canadian operator Rogers, and it's also called Rogers LTE Rocket Hub, but MF28B Hub could support single LTE band 7 (2600MHz), 3G HSPA (850/1900MHz) network is backward. As we can, it mainly for 3G network in North America.    

ZTE MF28G LTE Router is more powerful, it supports LTE dual-mode (TDD & FDD), it could support 4G TDD band 38 & band 40 (2300/2600MHz) and FDD band 7 & band 20 (800/2600). And ZTE MF28G supports 3G UMTS 900/2100MHz. ZTE MF880 4G LTE USB dongle could support these bands.   So unlocked ZTE MF28G could work with more 4G operators and in some countries, MF28G could replace MF28B.    

Data Rate Speed    

ZTE MF28B and MF28G could both reach peak downlink speed up to 100Mbps and uplink speed to 50Mbps on 4G FDD network. Simultaneously, MF28G could reach peak downlink up to 68Mbps and uplink speed to 17Mbps when working on TDD networks.  

 

Interfaces    

There are some adjustments in the bodies of the two ZTE LTE routers. MF28B has only 4 Ethernet ports (RJ45) while MF28G has 4 Ethernet. Ports, 2 RJ11 ports for telephone, and one USB 2.0 host port. So MF28G could support telephone and SD files sharing, but MF28B cannot.    

Logo    

Sometimes, the logo on the router may vary according to operators. And the firmware may also be customized for operators. As we can see, the Rogers LTE Hub ZTE MF28B has Rogers’s logo on it and the forms are version is also with Rogers logo.      

Other features of the routers are almost the same, to conclude, Unlocked ZTE MF28G is powerful when roaming globally. In certain countries, MF28B may be reliable on 3G networks.  

What's the difference between HUAWEI B593s-22 and B593u-12?

Here now, we get to know there is a new model available now for HUAWEI 4G LTE CPE Router B593, the model number is HUAWEI B593s-22, its appearance is almost same as other HUAWEI B593 sub-models, such as HUAWEI B593s-82, B593u-12, B593s-58, B593s-58b, but there is really some difference between these models.

Let us talk first the difference between HUAWEI B593u-12 and B593s-22:

From the above image, we could see that HUAWEI B593s-22 supports more 4G LTE bands, not only support FDD Band 800/900/1800/2100/2600MHz, but also TDD 2600MHz, while B593u-12 supports only FDD bands.

Secondly, the downlink speed of HUAWEI B593s-22 could reach up to 150Mbps while B593u-12 supports 100Mbps. So HUAWEI B593s-22 is actually a LTE Category 4 CPE Router, like HUAWEI E5172 4G LTE CPE.

Thirdly, the interface in the device is different, HUAWEI B593s-22 has only one USB interface in the device while B593u-12 has two. other features are the same. Other B593 Router sub-models have same appearance as B593u-12, just frequency bands are different.

So HUAWEI B593s-22 is a 4G LTE Category 4 Router even with same appearance like B593 other models. It's a dual-mode LTE Router for TDD/FDD modes.

What's the difference between HUAWEI B593s-22 and B593u-12?

Here now, we get to know there is a new model available now for HUAWEI 4G LTE CPE Router B593, the model number is HUAWEI B593s-22, its appearance is almost same as other HUAWEI B593 sub-models, such as HUAWEI B593s-82, B593u-12, B593s-58, B593s-58b, but there is really some difference between these models.

Let us talk first the difference between HUAWEI B593u-12 and B593s-22:

From the above image, we could see that HUAWEI B593s-22 supports more 4G LTE bands, not only support FDD Band 800/900/1800/2100/2600MHz, but also TDD 2600MHz, while B593u-12 supports only FDD bands.

Secondly, the downlink speed of HUAWEI B593s-22 could reach up to 150Mbps while B593u-12 supports 100Mbps. So HUAWEI B593s-22 is actually a LTE Category 4 CPE Router, like HUAWEI E5172 4G LTE CPE.

Thirdly, the interface in the device is different, HUAWEI B593s-22 has only one USB interface in the device while B593u-12 has two. other features are the same. Other B593 Router sub-models have same appearance as B593u-12, just frequency bands are different.

So HUAWEI B593s-22 is a 4G LTE Category 4 Router even with same appearance like B593 other models. It's a dual-mode LTE Router for TDD/FDD modes.

Huawei B593 B593U-12 4G LTE CPE Quick Setup

As the world's first 4G LTE CPE, Huawei B593 is now commonly used in many areas, but it seems Huawei B593 is used more at home or SOHO office. Even though it becomes more and more well-known, many users don't know how to set up this 4G CPE.  

 

The 4G LTE CPE is different from the 3G wireless router what we had used. There is no Port for Ethernet to input data. The CPE connects network via one SIM card Slot. And 4 Ethernet ports are outputting data for desktop. And two VoIP telephone ports and one battery charger port are lines with the Ethernet ports.  

 

Today, we have a brief introduction about how to quick setup the LTE CPE Huawei B593u-12.     First step is to plug the SIM card to Huawei B593; when you first get the device, you may don't know where to plug the SIM card, below the image will show the slot for SIM card.  

 

Then plug the power adapter and press the power button to start the device. After power on, the indicators on the front of Huawei B593 will start shinning. After few second, you could find the SSID in your PC, and then connect it through the WLAN Key on the back stick of the CPE.   After connected with the WiFi, land the home page http://192.168.1.1 and default password is admin

 

Then click the Setup and the management page will guide to Setup Wizard.

 

If the SIM card PIN is disabled, click next to Internet setting, users could choose the network mode and connection mode per users’ preference.

   

Then click next to set up WLAN, users could setup the WiFi mode, Country mode, Channel, SSID name and to hide the broadcast.  

 

Then next step ot set up the WLAN Security, users could setup the Security mode, WiFi key and WPA Encryption mode.

   

Then click to next and submit the setting and. After few seconds, the setup is finished and users could surf internet.

   

Sometimes, users may want to have better signal and high data transmission, so it’s necessary to use 4G LTE External antenna for HUAWEI B593. But there is no setting in HUAWEI B593 4G LTE CPE. It could enhance the signal invisibly.    

Huawei E8259 DC-PA+ Speed Box Review

If you have a Webcube White Huawei B183, you may get familiar with the speed box function. Actually, it's a stationary wireless router; Huawei makes it a special design like furniture, so the WiFi router could perfectly get involved with the White goods in house.

 

Based on the function, Huawei wireless router belongs to Household appliances, however, the network property makes it different from other furniture. With more and more creative design, the boundary line between furniture and networking devices are more and more vague. Huawei E8259 speed box just this kind of product.    

When we see the Huawei E8259 at MWC 2013, we didn't think it's a WiFi router, after checked the specification on the stick, we get to know it's the successor of Huawei B183 WebCube White Router.

 

The appearance of Huawei E8259 is not like the usual 3G router, such as Huawei B683 or B970b. It looks like a small box in pocket size. The most important feature should be the connection speed, upgraded from Huawei B183, Huawei E8259 supports up to 42Mbps download speed, which is double faster than B183. And with upgrade in firmware, HUAWEI E8259 could better support up to 32 users to get connected with the internet and surfing.  

HUAWEI E8259 also supports 2 * 2 WiFi at 2.4GHz and 5 GHz, which would reach up to 300Mbps download speed. As a wireless router, HUAWEI E8259 could edit, receive and sending SMS. And it also supports the basic functions as a wireless router: DHCP Server, NAT, DNS Relay, Router, fire wall functions. If you want to check more details, please check www.4gltemall.com .  

Huawei E5172 4G 150Mbps LTE Cat4 CPE Review

2012 is the beginning year of 4G LTE network, following that 2013 should be one to well develop for 4G LTE. Based on professional experience in network solution, Huawei is leading the trend of communication industry. As we can, Huawei had released many 4G UE, some of which are very popular by the operators and users.   In 2013, Huawei presents many new gadgets to public. Huawei E5172 150Mbps LTE Cat4 CPE is one of them. Today, we will have a look at this new 4G LTE CPE.  

Some readers may already have the first 4G LTE CPE B593 from Huawei. The CPE is for indoor use, with SIM card plug in, it supports maximum up to 100Mbps download speed. And there are 4 Ethernet ports, one telephone slot and one interface for power charge in B593. Huawei B593 also has many sub-branch models. These variants are for different network frequency bands and operators.    

Then here comes a question, since Huawei E5172 CPE is the latest model, what's the difference between them?   At first glance, Huawei E5172 is in black color, and the size is smaller than B593. It's key feature should be it's a LTE Cat4 CPE, which would support maximum download speed to 150Mbps. It's the fastest 4G CPE till now. This is speed on FDD network, but with TDD network, the speed could reach 112Mbps for downstream. The different frequency band decides many variants for Huawei E5172, such as Huawei E5172s-22, Huawei E5172s-515 and Huawei E5172s-920.

 

Similar to Huawei B593, E5172 also supports up to 32 users to share the wireless network. HUAWEI E5172 is also a stationary router, but there is only one port for LAN, while B593 has 4 ports for Ethernet. There is also port for power and one port for telephone. But there is only one external antenna port for HUAWEI E5172.

   

On the side of E5172, there is WPS, WLAN button, and reset hole is in the middle of them. Beside the LAN port, there is cover, below the cover is the battery. It’s inserted battery. On the front face, there are indicators listed on the surface.  

 

And per the official information, HUAWEI E5172 CPE also supports IPv 6, DLNA, Fax, Print, VPN and VLAN. It could support firewall and voice functions. With remote management, users could easily manage this fastest CPE till now. This is the LTE category 4 CPE HUAWEI E5172, we will introduce more applications later.    

Huawei E5172 4G 150Mbps LTE Cat4 CPE Review

2012 is the beginning year of 4G LTE network, following that 2013 should be one to well develop for 4G LTE. Based on professional experience in network solution, Huawei is leading the trend of communication industry. As we can, Huawei had released many 4G UE, some of which are very popular by the operators and users.   In 2013, Huawei presents many new gadgets to public. Huawei E5172 150Mbps LTE Cat4 CPE is one of them. Today, we will have a look at this new 4G LTE CPE.  

Some readers may already have the first 4G LTE CPE B593 from Huawei. The CPE is for indoor use, with SIM card plug in, it supports maximum up to 100Mbps download speed. And there are 4 Ethernet ports, one telephone slot and one interface for power charge in B593. Huawei B593 also has many sub-branch models. These variants are for different network frequency bands and operators.    

Then here comes a question, since Huawei E5172 CPE is the latest model, what's the difference between them?   At first glance, Huawei E5172 is in black color, and the size is smaller than B593. It's key feature should be it's a LTE Cat4 CPE, which would support maximum download speed to 150Mbps. It's the fastest 4G CPE till now. This is speed on FDD network, but with TDD network, the speed could reach 112Mbps for downstream. The different frequency band decides many variants for Huawei E5172, such as Huawei E5172s-22, Huawei E5172s-515 and Huawei E5172s-920.

 

Similar to Huawei B593, E5172 also supports up to 32 users to share the wireless network. HUAWEI E5172 is also a stationary router, but there is only one port for LAN, while B593 has 4 ports for Ethernet. There is also port for power and one port for telephone. But there is only one external antenna port for HUAWEI E5172.

   

On the side of E5172, there is WPS, WLAN button, and reset hole is in the middle of them. Beside the LAN port, there is cover, below the cover is the battery. It’s inserted battery. On the front face, there are indicators listed on the surface.  

 

And per the official information, HUAWEI E5172 CPE also supports IPv 6, DLNA, Fax, Print, VPN and VLAN. It could support firewall and voice functions. With remote management, users could easily manage this fastest CPE till now. This is the LTE category 4 CPE HUAWEI E5172, we will introduce more applications later.    

Should You Buy Huawei B683 or Huawei B593?

These days, we found some customers are in trouble of how to Choose the wireless router between Huawei B683 and B593?  

Frankly speaking, it's a good question for those users who are committed to Huawei brand. Based on reliable quality and performance in network connection, Huawei routers had crashed to CISCO   WLAN routers to some extent.

Then how to determine which router among Huawei routers? Take Huawei B683 and B593 as example, which one is better? For most users who want to buy router, the question should be “which one is appropriate?"  

To answer "which one is better" is easy; Huawei B593 is 4G LTE CPE which supports maximum download speed up to 100 Mbps and 50Mbps at uplink. With latest new technology, users could surf at revolutionary speed without latency. The two MIMO antennas can help B593 to reach the fastest possible speed.  

However, Huawei B683 3G Wireless Router could only run on 3G UMTS and 2G network, it can't work with 4G LTE network. And the maximum speed could reach only 28.8Mbps, which is only a quarter of speed from B593. There is only one external antenna connector on Huawei B683. So there is no doubt that Huawei B593 is much better than Huawei B683.   But should you buy Huawei B593 rather than Huawei B683？As the professional consult in wireless solution, the writer suggests users should have a second thought and the decision depends.    

If you buy the router for SOHO, home or office, in most of cases, Huawei B683 is enough to support the Internet activities based on the current 3G network. According to the practical test for 4G LTE CPE HUAWEI B593, the peak speed can’t reach 35Mbps with good network environment under LTE network. And to use new 4G service, the service fee is not at the similar price as 3G.  

There is no doubt that HUAWEI B593 LTE CPE would finally replace HUAWEI B683 Wireless Router. From a long-term point of view, 4G LTE network will become common. Since the LTE is just at the beginning, for the users concerning about the cost, HUAWEI B683 would be appropriate for current usage.    

If you need router for the wireless network solution in a project, concerning the future network upgrade and function is more important than cost, HUAWEI B593 LTE CPE should be the first option. This LTE CPE B593 is born to meet the industrial applications after time and time test.   Above is my opinion for user’s reference, if you need them, you could check the site www.4gltemall.com for unlocked routers.